Schneider
Showing 1–24 of 31 results
-
My KAWAN Rewards
{2000 points} KFC Cash Voucher RM 10
Please remember to:
- Apply redeemed coupon code to purchase this cash voucher
- Choose Local Pick up as shipping method (*delivery is not available for rewards collection)
- Local pick up location: N-0-11, Pusat Perdagangan Kuchai, No, 2, Jalan 1/127, Kuchai Entrepreneurs Park, 58200 Kuala Lumpur, Federal Territory of Kuala Lumpur.
SKU: KFC Cash Voucher RM 10 -
Controller, Lighting Control System
Schneider Blind / switch actuator REG-K/12x/24x/10 with manual mode
Controller, Lighting Control SystemSchneider Blind / switch actuator REG-K/12x/24x/10 with manual mode
For independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads
via make contacts. The function of the blind or switching channels is freely configurable. All
blind/switch outputs can be operated manually using push-buttonsSKU: so-sch-9 -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8 -
Lighting Control System, Sensor
Schneider KNX D-Life Push-button Pro, Metal nickel
Push-button panel with a programmable number of buttons
You can activate a maximum of four touch surfaces to which you can assign the desired room functions, e.g. switching or dimming light, controlling blinds or calling up scenes
If required, you can disable the touch surfaces and also define the type of
disablingThe labelling of the buttons is accomplished using backlit symbols which display the room functions
For this, you can either use the enclosed prefabricated foils or the
individual symbols with various motifsYou can replace the symbols at any time in accordance with changing requirements
The push-button has an integrated bus coupler and its power is supplied via the KNX bus.
SKU: so-sch-23 -
Gateway, Lighting Control System
Schneider KNX DALI gateway REG-K/1/16(64)/64/IP1
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).
The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgraded
It supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.The 64 ECGs can be controlled individually or in groups.
Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: so-sch-3 -
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Lighting Control System, Sensor
Schneider KNX Push-button Pro, polar white, glossy, System M
* a push-button panel with a programmable number of buttons
*You can activate a maximum of four touch surfaces to which you can assign the desired room functions, e.g. switching or dimming light, controlling blinds or calling up scenes
*If required, you can disable the touch surfaces and also define the type of disabling
SKU: so-sch-16 -
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Lighting Control System, Sensor
Schneider Push-button, 2-gang plus, anthracite, System M
The push-buttons can be set to perform various functions, allowing you, for example, to switch lighting on and off or dim it
control the blinds or retrieve stored scenes.
Push-buttons with IR receiver also allow you to operateeach key on the push-button using a Schneider remote control or another IR remote control.
SKU: so-sch-19 -
Lighting Control System, Sensor
Schneider Push-button, 2-gang plus, polar white, glossy, System M
Provides you with two, four or eight operating surfaces, two in the case of 1-gang pushbuttons, four in the case of 2-gang push-buttons, and eight in the case of 4-gang push-buttons.
The push-buttons can be set to perform various functions, allowing you, for example, to switch lighting on and off or dim it
control the blinds or retrieve stored scenes
Push-buttons with IR receiver also allow you to operate each key on the push-button using a Schneider remote control or another IR remote control
SKU: so-sch-17
