Explosion Proof
Showing all 19 results
-
Explosion Proof, Indoor Lighting, Lamp, Outdoor Lighting
EATON – CROUSE HINDS cLLK 07…series Explosion Proof Fluorescent Lighting For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, Lamp, Outdoor LightingEATON – CROUSE HINDS cLLK 07…series Explosion Proof Fluorescent Lighting For ZONE 1, 21, 2 & 22 Hazardous Area.
EATON-CROUSE HINDS cLLK 07…series Explosion Proof Fluorescent Lighting For ZONE 1, 21, 2 & 22 Hazardous Area.
The cLLK 07 Ex-protected light fittings for bi-pin fluorescent lamps are fitted with an electronic ballast and conform
to the ATEX Directive 94/9/EG. The modern electronic ballast according to the latest standards (IEC 60079-7: 2006)
allows a safe and economical operation of bi-pin fluorescent lamps G13 according to IEC 60081. Lamps reaching its
end of life will be monitored and securely switched off (EOL-effect). Due to the standard dual channel architecture (with
double lamp fittings) if one fluorescent lamp fails, the other fluorescent lamp will independently stay in operation. The
standard single-sided throughwiring in connection with the variety of possi -bilities offers a cost efficient installation.
Doublesided lock with 10 or 20 latch points allows the protective bowl to be hingeable on both sides meaning the
fitting can be mounted without having to pay attention to which side is the right side. Automatic switch built as a safety
disconnector according to EN 60947 (IEC 664) with an automatic switch ensuring the disconnection of all exposed
components when the fitting is opened.SKU: n/a -
Explosion Proof, Indoor Lighting, Lamp, Outdoor Lighting
EATON – CROUSE HINDS cLLK 07…series Explosion Proof Fluorescent Lighting For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, Lamp, Outdoor LightingEATON – CROUSE HINDS cLLK 07…series Explosion Proof Fluorescent Lighting For ZONE 1, 21, 2 & 22 Hazardous Area.
EATON-CROUSE HINDS cLLK 07…series Explosion Proof Fluorescent Lighting For ZONE 1, 21, 2 & 22 Hazardous Area.
The cLLK 07 Ex-protected light fittings for bi-pin fluorescent lamps are fitted with an electronic ballast and conform
to the ATEX Directive 94/9/EG. The modern electronic ballast according to the latest standards (IEC 60079-7: 2006)
allows a safe and economical operation of bi-pin fluorescent lamps G13 according to IEC 60081. Lamps reaching its
end of life will be monitored and securely switched off (EOL-effect). Due to the standard dual channel architecture (with
double lamp fittings) if one fluorescent lamp fails, the other fluorescent lamp will independently stay in operation. The
standard single-sided throughwiring in connection with the variety of possi -bilities offers a cost efficient installation.
Doublesided lock with 10 or 20 latch points allows the protective bowl to be hingeable on both sides meaning the
fitting can be mounted without having to pay attention to which side is the right side. Automatic switch built as a safety
disconnector according to EN 60947 (IEC 664) with an automatic switch ensuring the disconnection of all exposed
components when the fitting is opened.SKU: n/a -
Explosion Proof, Explosion Proof Beacon Light Fitting, Explosion Proof LED Lighting, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof Beacon Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Explosion Proof Beacon Light Fitting, Explosion Proof LED Lighting, Indoor Lighting, Lamp, LED, Outdoor LightingExplosion Proof Beacon Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
COELBO EVA…series Explosion Proof Beacon Light Fitting
● Body in Aluminum light alloy.
● Safety globe: tempered borosilicate.
● Reduced dimensions by virtue of the fixture type EVA 50;
they are normally associated to alarm and signalling
systems, either fixed or mobile.● Complete with blinking Xenon flash lamp.
● Connection E27.
● Power Supply 12V / 24V d.c./ a.c..● Continuous duty.
Optional :
– Wire guard in Stainless Steel AISI 304.
– Painting RAL 3000.
– Power Supply 125 or 230 VAC.
– Signalling colors (Light Blue, White, Yellow, Orange, Red,
Green).– Cable entries NPT ANSI B1.20.1 (N) or Metric ISO 262 (M).
#ExplosionProofBeaconLight
#ExplosionProofWarningLight
#ExplosionProofLEDLights
SKU: n/a -
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof Fluorescent Light Fitting For ZONE 2 & 22 Hazardous Area
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor LightingExplosion Proof Fluorescent Light Fitting For ZONE 2 & 22 Hazardous Area
Schuch Quality – Your advantage:
• A high-quality chemically resistant light fitting of a sturdy design, best suitable for a longtime application in industrial areas
– housing made from glass fibre reinforced polyester resin of a high impact resistance, wall thickness: 2 mm
– injection moulded diffuser from highly shock resistant polycarbonate, resistance
impact: 16 Nm
– captive clips made fom stainless steel
– shock and earth-quake tested (by TÜV)
– wide range of Permissible ambient temperature from -20°C to +40°C
(50°C on request)
• “End-of-life swiching-off system” i.e. at the end of its life a fluorescent tube
is safely switched off
• Best suitable for installation and maintenance purpose ensuring simultaneously a high safety of continuous operation
– the diffuser is hinged on one side and can be suspended, the reflector can be suspended for quick
mains connection and lamp inserting/replacement
– quick and cost saving wiring in a continuous row installation thanks to a looping facility on one small
end of the housing (special version)
• High flexibility and wide range of application thanks to a great variety of equipment
– ATEX certification for gas and dust hazardous areas (ZONES 2 and 22)
– with electronic ballast or low loss conventional ballast
– for T16, T26 and T38 lamps
– for outdoor application at high ambient temperatures, for high installation, as emergency illumination etc.
• Excellent light distribution and glare limitation thanks to the diffuser with its light technically optimized internal prismsSKU: n/a -
Explosion Proof, Explosion Proof Highbay, Indoor Lighting, Outdoor Lighting
Explosion Proof Highbay Light Fitting For Hazardous Material Storage Warehouse
Explosion Proof, Explosion Proof Highbay, Indoor Lighting, Outdoor LightingExplosion Proof Highbay Light Fitting For Hazardous Material Storage Warehouse
Application :
• For use in corrosive, harsh, hazardous applications such as chemical, petrochem,
marine, power generation, pharmaceutical, or food processing plants• Electro-Reg® ballast provides long life, high lumen maintenance metal halide
light source for low operating and maintenance costs• Mogul base socket
• Cover selection of rigid and fl exible pendant, ceiling, wall and 25° stanchion in
varying threaded NPT entries• Minimum starting temp of -20°F for MV/MH and -40°F for HPS
• Copper-free (<0.4%) aluminum housing, cover and guard with Lektrocote®
powder polyester paint fi nish• Optic choices of impact resistant glass globe, sym./asym. glass refractors,
dome/angle FRP refl ector, 19” enclosed refl ector, and polycarbonate enclosed
low bay• Modular design permits selection of cover, body, globe, guard and refl ector
• UL844 Standard: Class I, Div. 2, Groups A,B,C,D; Class II, Div. 1/2, Groups E,F,G;
Class III, Div. 1/2• UL 1598A Marine Outdoor; NEMA 4X and IP66 with K-G globe; 40°C ambient listed; UL1598 Wet Location
#ExplosionProofHighbay
#ExplosionProofLighting
SKU: n/a -
Explosion Proof, Explosion Proof LED Lighting, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof LED Emergency Compact Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
-
Explosion Proof, Explosion Proof LED Lighting, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof LED Floodlight Fitting For ZONE 2 & 22 Hazardous Area.
-
Electrical & Wiring Accessories, Explosion Proof, Indoor Lighting, LED, Outdoor Lighting
Explosion Proof LED Light Fitting For ZONE 2 & 22 Hazardous Area.
Electrical & Wiring Accessories, Explosion Proof, Indoor Lighting, LED, Outdoor LightingExplosion Proof LED Light Fitting For ZONE 2 & 22 Hazardous Area.
SCHUCH nD866…series ExLed2 latest LED technology.
With luminous flux up to 9,210 lm and luminous efficacy up to 126 lm/W, the light fittings are not only extremely powerful but also highly efficient compared to competitive products.
The light fittings are available in 2 versions:
Energy optimized versions as substitute for EX linear luminaires with conventional lamps up to 2 x 58W and luminous flux optimized versions for areas that require high level of illumination. In addition, the customer can also chose between clear and frosted diffuser.
The frosted diffuser offers excellent glare limitation as well as comfortable light perception due to the homogeneous illumination – no single light points are visible, whereas the clear diffuser is particularly suitable for areas that require maximum luminous flux and high illumination levels.
Furthermore, the completely newly developed light fitting offers various unique features:
High colour rendering CRI>80 for installation in almost all work spaces in accordance with relevant national workplace guidelines.
Applicable at ambient temperatures between -30°C and +40°C / +60°C , depending on version.
Robust enclosure to avoid mechanical or electrostatic impact to the LED modules – provided through sandwich-design of diffuser and reflector
Easy to install due to an outer mounting system for variable mounting point distances.
The light fittings are also available with DALI-interface (optional).
With the new series e 866… SCHUCH now offers its customers the possibility to benefit from the advantages of the LED technology even in hazardous areas, where T8-flourescent tubes dominated so far.SKU: n/a -
Explosion Proof, Indoor Lighting, LED, Outdoor Lighting
Explosion Proof LED Linear Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, LED, Outdoor LightingExplosion Proof LED Linear Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
SCHUCH e865…series Explosion Proof LED Linear Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
Your Advantage:
• LED modules with innovative encapsulation.
• Explosion Group IIC, hence suitable for atmospheres with hydrogen and acetylene.
• Highest efficiency with luminous efficacy up to 147lm/W
• Homogeneous illumination by using frosted diffusers (versions e865F..) no particular light points.
visible, comfortable perception of light, brilliant glare limitation
• High colour reproduction Ra typically 80, according to the workplace guide lines suitable for nearly all plant locations.
• Reflector and cover in sandwich design to protect the LED-Modules from mechanical or electrostatic damages due to accidential contact..
• Version with higher luminous flux for areas where higher illumination is needed.
• For high ambient temperatures up to +70°C depending on version.
• External mounting system for variable mounting distances and easy installation (retaining clips HK865 P).
• Lower maintenance and downtime costs due to long maintenance intervals.
• ECG and reflector with LED-modules replacable by qualified personnel on-site.SKU: n/a -
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof Linear LED Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor LightingExplosion Proof Linear LED Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area
EATON’s Crouse-Hinds series HLL linear LED light fitting is constructed with an aluminium housing and high-impact resistant polycarbonate cover, providing extreme durability and reliability in Zone 1, 2, 21 and 22 hazardous areas.
The use of high-quality LED chips, coupled with our exten sive experience in thermal mana gement of electrical components in hazardous areas, ensures long service life of the HLL series. The extended temperature range of -40 °C to +55 °C allows these luminaires to be used in a wide range of ambient conditions where an explosive atmosphere is to be expected.
With its long service life, low maintenance requirements and low energy consumption, the HLL provides superior performance with a competitive payback versus traditional fluorescent fixtures.
The luminaire series is also available as a single-battery emergency light fitting HLL-EM for ambient temperatures from -25 °C to +55 °C.SKU: n/a -
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof Non Metallic Fluorescent Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
-
Electrical & Wiring Accessories, Explosion Proof, Explosion Proof Plug & Switch Socket
Explosion Proof Plug & Switch Socket With Rotary ON-OFF Switch For ZONE 1, 21, 2 & 22 Hazardous Area.
-
Explosion Proof, Explosion Proof Public Speaker
Explosion Proof Public Address Speaker For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Explosion Proof Public SpeakerExplosion Proof Public Address Speaker For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof Public Address Speaker For ZONE 1, 21, 2 & 22 Hazardous Area.
Type : DSP-15 EExeN
Material / Color …………………….. Anti-static PA / Black
Mounting ……………………………………………….. Bracket
Termination …………………. e-chamber, screw terminals
Weight w/ transformer ……………………………….. 2,3 kg
IP-rating ……………………………………………………. 67
Max / min amb temp …………………………. 40°C / -50°C
Rated / max. power ………………………….. 25 W / 25 W
SPL 1W/1m …………………………………………….. 110 dB
SPL rated power ……………………………………… 122 dB
Effective freq range ………………………… 370 – 7000 Hz
Dispersion (-6dB) 1kHz / 4kHz ………………… 200° / 50°
Directivity factor, Q (1 kHz) …………………………….. 3,9
Options …………………………….. Impedances and labelsSKU: n/a -
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor Lighting
Explosion Proof Tank Inspection Light For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor LightingExplosion Proof Tank Inspection Light For ZONE 1, 21, 2 & 22 Hazardous Area.
COELBO EVO series Explosion Proof Tank Inspection Light For ZONE 1, 21, 2 & 22 Hazardous Area.● Lighting fixtures for portholes, ideal for the optimum viewingarea to be monitored.● The built-in switch version allows the lamp to be switched onand off directly from the observation point and the for thenecessary time.● The lamp can be replaced without removing the armor.● Epoxyvinyl internal white coating for optimal luminosity.● Lampholder E27.● External screws in Stainless Steel AISI 316.#ExplosionProofTankInspectionLightSKU: n/a -
Electrical & Wiring Accessories, Explosion Proof, Explosion Proof Terminal Enclosure
Explosion Proof Terminal Enclosure For ZONE 1, 21, 2 & 22 Hazardous Area.
Electrical & Wiring Accessories, Explosion Proof, Explosion Proof Terminal EnclosureExplosion Proof Terminal Enclosure For ZONE 1, 21, 2 & 22 Hazardous Area.
ROSE Explosion proof (Ex) enclosures made of aluminium, polyester and stainless steel as well as control stations and other Ex equipment offer reliable basic protection for electrical distributions used in potentially explosive areas. The application range of the products is categorised in Zone 1 and 2 for gas explosion protection, and in Zone 21 and 22 for dust explosion protection. The products are in accordance with all EC harmonized standards as well as the ATEX guideline and
worldwide IECEx scheme :
EN/IEC 60079-0, EN/IEC 60079-1, EN/IEC 60079-7, EN/IEC 60079-11, EN/IEC 60079-15, EN/IEC 60079-18, EN/IEC 60079-28, and EN/IEC 60079-31.
ROSE Ex products have fulfilled the most versatile demands
worldwide for years – either in arctic areas with low temperatures or in hot desert areas with high temperatures.
For more than 30 years, ROSE Ex enclosures made of stainless steel, GRP polyester and aluminium have proved reliable Ex appliances and are used by renowned plant contractors, EPC‘s and owners all over the world.SKU: n/a -
Explosion Proof, Indoor Lighting, LED, Outdoor Lighting
SCHUCH e840…series Explosion Proof LED Linear Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, LED, Outdoor LightingSCHUCH e840…series Explosion Proof LED Linear Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
SCHUCH e840…series Explosion Proof LED Linear Light Fitting For ZONE 1, 21, 2 & 22 Hazardous Area.
• Extremly robust construction of housing and diffuser.
• Comfortable central locking mechanism for easy maintenance.
• Innovative encapsulation with high transmission rate
• Homogene lighting distribution by frosted anti-glare modules-protecting the LEDs as well of ESD and mechanical damage. No individual light points visible, comfortable perception of light, brilliant glare limitation.
• High colour rendering index CRI > 80, according to the workplace guide lines suitable for nearly all plant locations.
• ECG and reflector with LED-modules replacable by qualified personnel on-site.SKU: n/a -
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor Lighting
SCHUCH nD8301 / nD8302…series Explosion Proof LED High Bay Light Fitting For ZONE 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, Lamp, LED, Outdoor LightingSCHUCH nD8301 / nD8302…series Explosion Proof LED High Bay Light Fitting For ZONE 2 & 22 Hazardous Area.
SCHUCH nD8301 / nD8302..series Explosion Proof LED High Bay Light Fitting For ZONE 2 & 22 Hazardous Area.
Product highlights:
• High efficient by use of top-quality mid-power LEDs.
• Extremely high lifetime even at the maximum permissible ambient temperature.
• Optimized thermo management due to direct mounting of the LED modules to the housing and separate housings for ECG- and LED-moules, huge heat sink with excellent heat dissipation.
• DALI interface (standard) for dimmed operation.
• Colour rendering index CRI > 80.
• Uniform illumination due to the „Multi-Layer Technology“ i.e. every individual LED illuminates the whole surface, the light curves of the individual LED are overlapping. No dark zones if any single LED would fail. The uniformity of the illumination is kept.
• Future proof by using standardized LED-modules (Zhaga).SKU: n/a -
Explosion Proof, Indoor Lighting, Outdoor Lighting
SCHUCH nD8700 / nD8800…series Explosion Proof LED Floodlight For ZONE 2 & 22 Hazardous Area.
Explosion Proof, Indoor Lighting, Outdoor LightingSCHUCH nD8700 / nD8800…series Explosion Proof LED Floodlight For ZONE 2 & 22 Hazardous Area.
SCHUCH nD8700 / nD8800…series Explosion Proof LED Floodlight For ZONE 2 & 22 Hazardous Area.
Product Highlights:
• Efficient 1:1 replacement for conventional HIT 250W or 400W floodlights.
• Optimal thermal management possible by direct connection from the LED to the diecast aluminium housing, large cooling surface, excellent thermal conductivity.
• Extremely high lifetime even at maximum permissible ambient temperature
• Uniform illumination due to the „Multi-Layer Principle“ i.e. every individual LED illuminates the whole surface, the light curves of the individual LED are overlapping.
• Future design due to use of ZHAGA conform LED modules.SKU: n/a
