Controller
Showing 1–24 of 27 results
-
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1 -
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1 -
Controller, Lighting Control System
ABB Light Controller, 2-fold, 1-10 V
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
SKU: LR/S2.16.1 -
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1 -
Controller, Lighting Control System
ABB Line Coupler
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control
device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgradedIt supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups. Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: LK/S 4.1 -
Controller, Lighting Control System
ABB Shutter Actuator 4 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps.
Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 4.230.1.1 -
Controller, Lighting Control System
ABB Shutter Actuator 8 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 8.230.1.1 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 4-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs. Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually. Manual and visual operation is included. A power supply is not necessary.
SKU: SD/S4.16.1 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1 -
Controller, Lighting Control System
Greencontrols KNX 12-Channel Switching Actuator
Greencontrols Regular Switching Actuator Series is designed for switching resistive loads and 12 independent electric loads via floating contacts. Each channel has a mechanical bypass button for manual operation.
SKU: GC04SA003 -
Controller, Lighting Control System
Greencontrols KNX 4-Channel 16A Switching Actuator
Greencontrols Regular Switching Actuator Series is designed for switching resistive loads and 4 independent electric loads via floating contacts. Each channel has a mechanical bypass button for manual operation.
SKU: GC04SA001 -
Controller, Lighting Control System
Greencontrols KNX 4-Channel Shutter Actuator
This model is designed to control 230VAC drives for positioning blinds, roller shutters, awnings or relevant shading products. The output contacts are designed to mechanically interlocked in order for both contacts to not operate at the same time.
SKU: GC06SH001 -
Controller, Lighting Control System
Greencontrols KNX 8-Channel Switching Actuator
Greencontrols Regular Switching Actuator Series is designed for switching resistive loads and 8 independent electric loads via floating contacts. Each channel has a mechanical bypass button for manual operation.
SKU: GC04SA002 -
Controller, Lighting Control System
Greencontrols KNX Room Controller Premium 3.0
Greencontrols Room Control Unit is a multipurpose KNX controller designed to control various different elements within a room. It is also pre-built with a IP interface to allow integration back to Hotel’s Property Management System.
It comes with 24 x 16A Outputs + 20 Inputs
SKU: GC02RC001P4 -
Controller, Lighting Control System
Schneider Blind / switch actuator REG-K/12x/24x/10 with manual mode
Controller, Lighting Control SystemSchneider Blind / switch actuator REG-K/12x/24x/10 with manual mode
For independent control of up to 12 blind/roller shutter drives or for switching up to 24 loads
via make contacts. The function of the blind or switching channels is freely configurable. All
blind/switch outputs can be operated manually using push-buttonsSKU: so-sch-9 -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8 -
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Controller, Lighting Control System
Schneider Spacelogic KNX Coupler DIN Rail
For logical connection and electrical isolation of lines and areas.
The device supports KNX Security. This option can be activated in the ETS.
As a secure line coupler, the device enables the forwarding of both secured and unsecured communication.
In addition, access to the device itself (e.g. for a download) is protected by KNX Security.
The device has a filter table (8k bytes) and ensures a galvanic separation between the lines.
The coupler supports KNX longframes and is compatible with the ETS 5 software.With 2 integrated push-buttons for testing purpose and 3 status LEDs.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using bus connecting terminals.
SKU: so-sch-2
