ABB Actuator 12 Fold
Out of stock
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
RM5,331.00
Out of stock
*Product Net Depth / Length:64.5 mm
*Product Net Height:90 mm
*Product Net Width:216 mm
*Product Net Weight:0.608 kg
Container Information
*Package Level 1 Units:box 1 piece
*Package Level 1 EAN:4016779877800
*Package Level 1 Depth / Length:220 mm
*Package Level 1 Height:65 mm
*Package Level 1 Width:92 mm
*Package Level 1 Gross Weight:0.673 kg
Brand
ABB
| Weight | 0.608 kg |
|---|---|
| Dimensions | 6.45 × 2.16 × 9 cm |
| brands | ABB |
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Lighting Control System
Switching Actuator – 12 channels, 20A, with Current Detection
The 12-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 12 independent
electric loads via floating contacts. It is built-in with
a mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA006
