Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode

Nominal voltage: AC 100-240 V ?10%
Operating voltage: min. AC 90 V – max. AC 265 V
Mains frequency: 50-60 Hz ?10%
For each blind output:
Nominal current: 10 A, inductive load cos_ = 0.6
Motor load: AC 100 V, max. 434 W
AC 230 V, max. 1000 W
AC 240 V, max. 1043 W
For each switch output:
Nominal current: 10 A, ohmic load cos_ = 1
10 A, inductive load cos_ = 0.6
Nominal load
Incandescent lamps: AC 100 V, max. 869 W
AC 230 V, max. 2000 W
AC 240 V, max. 2086 W
Halogen lamps: AC 100 V, max. 739 W
AC 230 V, max. 1700 W
AC 240 V, max. 1773 W
Fluorescent lamps: AC 100 V, max. 434 VA
AC 230 V, max. 1000 VA
AC 240 V, max. 1043 VA
parallel-compensated
Capacitive load: AC 230 V, 10 A, max. 105 ?F
External auxiliary voltage (optional):
Nominal voltage: AC 110-240 V ?10%
Operating voltage: min. AC 92 V – max. AC 265 V
Device width: 8 modules = approx. 144 mm
Note: The blind actuator/switch actuator cannot be used in conjunction with the weather-dependent automatic functions of the weather combi-sensor/DCF77 art. no. MTN663692. If you
require these functions then use the blind actuators art. no. MTN6498…
Contents: With bus connecting terminal and cable cover.