*Operating voltage : 110 ? 240 V AC 50 ? 60 Hz
*Voltage inputs : 10 V DC ? 240 V AC 2 mA
*Max. cable length : 100 m
*Output : 12 V DC/18 mA, SELV,
No products in the cart.
Out of stock
*6-way binary input FIX1
*2 additional channels operable by buttons on the device, but without input, Free allocation of functions: switch/push button, dimming, blinds/roller blinds, counter, repeat telegram, sequences
RM1,421.44
Out of stock
*Operating voltage : 110 ? 240 V AC 50 ? 60 Hz
*Voltage inputs : 10 V DC ? 240 V AC 2 mA
*Max. cable length : 100 m
*Output : 12 V DC/18 mA, SELV,
There are no inquiries yet.
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
For independent switching of up to 12 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation