Dimmer Actuator 1-10V, 4 Channels
100 in stock
The 1-10V Dimming Actuator is designed for
installation in distribution board and suitable for
control dimmable electronic ballast or
transformers with 1-10 V interface . It comes with
4 channel of output floating switching contact 6A
each. Each output is parameterized via ETS with
connection to KNX using bus connection terminal.
RM1,360.80
100 in stock
Dimming Actuator, 0-10V, 4 channels
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Control Current 100mA / channel
Switch Current 6A, 150uF
Input Wire length Max. 70m (0.8mm2)
Wire length Max. 100m (1.5mm2)
Operation LED Green means device working well;
LED Red and push button for assigning
physical address
KNX Connection Bus terminal (Black / Red)
Operation Temperature –10 °C ~ + 45 °C
Storage Temperature – 40 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 72 x 90 x 65 mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Finishing White
Weight 0.5KG
Brand
Greencontrols
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Controller, Lighting Control System
ABB Light Controller, 2-fold, 1-10 V
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
SKU: LR/S2.16.1 -
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1
There are no reviews yet.