Dimmer Actuator – 1300W, Leading, 2 Channels
100 in stock
This Dimming Actuator is a Leading Edge Dimmer
designed for installation in distribution board and
suitable for control for high powered dimming of
different loads type (incandescent lamps, 230 VAC
halogen lamps or low voltage halogen lamps on
electronic or conventional transformers). Each
dimmer actuator is parameterized via ETS with
connection to KNX.
RM1,728.00
100 in stock
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Power Input 240V 50Hz
Current Consumption ≤10mA
Power Consumption ≤250mW
Dimming Type SCR based Leading Edge
Dimming Output 1300W / Channel
Operation LED Green means device working well;
LED Red and push button for assigning
physical address
KNX Connection Bus terminal (Black / Red)
Operation Temperature –10 °C ~ + 45 °C
Storage Temperature – 40 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 215 x 90 x 65 mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Finishing White
Weight 0.7KG
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5
