Dimmer Actuator – 2000W, Leading, 1 Channel
100 in stock
This Dimming Actuator is a Leading Edge Dimmer
designed for installation in distribution board and
suitable for control for high powered dimming of
different loads type (incandescent lamps, 230 VAC
halogen lamps or low voltage halogen lamps on
electronic or conventional transformers). Each
dimmer actuator is parameterized via ETS with
connection to KNX.
RM1,296.00
100 in stock
Dimming Actuator, 1 Channel, 2000W
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Power Input 240V 50Hz
Current Consumption ≤10mA
Power Consumption ≤250mW
Dimming Type SCR based Leading Edge
Dimming Output 2000W / Channel
Operation LED Green means device working well;
LED Red and push button for assigning
physical address
KNX Connection Bus terminal (Black / Red)
Operation Temperature –10 °C ~ + 45 °C
Storage Temperature – 40 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 215 x 90 x 65 mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Finishing White
Weight 0.7KG
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1 -
Lighting Control System
Switching Actuator – 12 channels, 20A, with Current Detection
The 12-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 12 independent
electric loads via floating contacts. It is built-in with
a mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA006 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1
