Steinel DUAL HF EAN 4007841002978
Out of stock
Twice as vigilant! High-frequency corridor sensor Presence Control PRO Dual HF COM1 for indoors
ideal for passageways and long corridors
installation height up to 3.5 m
for switching light ‘ON’ and ‘OFF’
DUAL-HF technology for detecting radial movement over up to 20 m in two directions, detection regardless of temperature
HF-sensor technology detects movement through glass, wood and stud walls, switches light ‘ON’ almost instantly.
RM421.67
Out of stock
European Article Number (EAN)
4007841002978
Type
Presence detector
Dimensions (L x W x H)
120 x 120 x 75 mm
Mains power supply
230 V / 50 ? 60 Hz
Sensor Technology
High frequency
Application, place
Indoors
Application, place, room
corridor / aisle, Indoors
Twilight setting TEACH
Yes
Twilight setting
10 ? 1000 lx
Time setting
30 s ? 30 Min.
Constant-lighting control
No
Basic light level function
No
Functions
Normal / test mode, Semi-/fully automatic, Pushbutton / switch mode, Manual ON / ON-OFF
Settings via
Remote control,DIP switches,Potentiometers,Smart Remote
For more product details, please refer :
- https://www.steinel.de/en/lights-sensors/products/sensors/presence-detectors/dual-hf-002978.html
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1
