Steinel HF 3360 EAN 4007841033682
Out of stock
Perfection through and through. High-frequency motion detector HF 3360, ideal for basement corridors, stairwells, multi-storey car parks, installation height 2.8 m, 360? angle of coverage, reach 1 ? 8 m (radial), detection regardless of temperature, HF-sensor technology also detects movement through glass, wood and stud walls, heavy-duty relay for high switching capacity. Available either in round or square surface-mounted and concealed version.
RM305.92
Out of stock
European Article Number (EAN)
4007841033682
Type
Motion detectors
Dimensions (? x H)
124 x 64 mm
Mains power supply
220 ? 240 V / 50 ? 60 Hz
Sensor Technology
High frequency
Application, place
Indoors
Application, place, room
function room / ancillary room, stairwell, WC / washroom, multi-storey / underground car park, Indoors
Twilight setting TEACH
Yes
Twilight setting
2 ? 1000 lx
Time setting
5 s ? 15 Min.
Output
2000 W
Constant-lighting control
No
Basic light level function
No
Functions
Normal / test mode, Manual ON / ON-OFF
For more product detailas, please refer :
- https://www.steinel.de/en/lights-sensors/serien-lights-sensors/ir-quattro/ir-quattro-000349.html?redirected=1
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Line Coupler
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control
device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgradedIt supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups. Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: LK/S 4.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1
