Steinel HF 3360 EAN 4007841058241
Out of stock
Perfection through and through. High-frequency motion detector HF 3360
ideal for basement corridors, stairwells, multi-storey car parks
installation height 2.8 m, 360? angle of coverage, reach 1 ? 8 m (radial)
detection regardless of temperature
HF-sensor technology also detects movement through glass, wood and stud walls
Available either in round or square surface-mounted and concealed version
RM421.67
Out of stock
- European Article Number (EAN) 4007841058241
Type Motion detectors
Dimensions (? x H) 124 x 64 mm
Sensor Technology High frequency
Application, place Indoors
Application, place, room
function room / ancillary room, stairwell, WC / washroom, multi-storey / underground car park, Indoors
Type of installation
Concealed wiring
Twilight setting TEACH Yes
Time setting 0 s ? 1092 Min.
Basic light level function Yes
With bus coupling Yes
Settings via ETS software,Remote control,Bus,Smart Remote
Material Plastic
Colour white
For more product details, please refer :
- https://www.steinel.de/en/lights-sensors/products/sensors/motion-detectors/hf-3360-033750.html
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
Schneider KNX DALI gateway REG-K/1/16(64)/64/IP1
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).
The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgraded
It supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.The 64 ECGs can be controlled individually or in groups.
Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: so-sch-3 -
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6
