IR Transmitter 2fold
100 in stock
The IR Transmitter is used to control IR devices. It
has 2 channels and coupled with the IR Learner is
able to learn up to 64 functional codes / channel. It
is connected to the KNX directly for integration. Its
extremely compact design enables it to be inserted
into a conventional 60mm or 86mm wiring box.
RM651.30
100 in stock
IR Transmitter
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Operating Current, KNX < 20mA
Channel Output 2 Channels
IR Wavelength 940nm
Connections KNX Bus connecting terminal (black/red)
Operation Temperature –5 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 55 °C
Installation Flush Mounted in wiring box (either 60×60 or 86×86) mm
Size (W x H x D) 46mm x 46mm x 11.7mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Operation Temperature –5 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 55 °C
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005 -
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1
