Steinel IR Quattro SLIM EAN 4007841593414
Out of stock
Genuine 16 m2 of presence detection concentrated on 4 mm. Control PRO IR Quattro SLIM COM1 presence detector for indoors, ideal for small offices, store, service and utility rooms, washrooms and WCs, for mounting at a height of up to 4 m, for switching light ON and OFF, square presence detection zone covering 16m_, high-quality retina lens.
RM363.79
Out of stock
European Article Number (EAN)
4007841593414
Type
Presence detector
Dimensions (L x W x H)
77 x 77 x 55 mm
Mains power supply
120 ? 250 V / 50 ? 60 Hz
Power supply, detail
500 VA max., 120 V
Sensor Technology
passive infrared
Application, place
Indoors
Twilight setting TEACH
Yes
Twilight setting
10 ? 1000 lx
Time setting
30 s ? 30 Min.
Constant-lighting control
No
Basic light level function
No
Functions
Normal / test mode, Semi-/fully automatic, Manual ON / ON-OFF
Settings via
Remote control,Smart Remote
For more product details, please refer :
- https://www.steinel.de/en/lights-sensors/serien-lights-sensors/ir-quattro/ir-quattro-slim-005795.html
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1 -
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1
