Steinel IS 3360 MX Highbay EAN 4007841033569
Out of stock
- A head for heights.
- Powerful reach. Reliable.
- IS 3360 MX Highbay motion detector ? ideal for high ceilings in industrial buildings or commercial propertie
- For mounting heights of up to 14 m.
- High-precision 360? infrared sensor.
- Maximum reach: 18 m
- For watching over up to 1000 sq.m
- Available as square surface-mounted and concealed version.
RM298.38
Out of stock
- Available as square surface-mounted and concealed version.
- European Article Number (EAN) 4007841033569
- Type : Motion detectors
- Dimensions (L x W x H) 95 x 95 x 65 mm
- Mains power supply 220 ? 240 V / 50 ? 60 Hz
- Sensor Technology passive infrared
- Application, place Indoors
- Application, place, room high-bay warehouse, sports hall, Indoors
- Twilight setting 2 ? 1000 lx
- Time setting 5 s ? 15 Min.
- Output 2000 W
- Constant-lighting control No
- Basic light level function No
- Functions Normal / test mode, Manual ON / ON-OFF
- Settings via Remote control,Potentiometers,Smart Remote
For more product details, please refer :
- https://www.steinel.de/en/lights-sensors/products/sensors/motion-detectors/is-3360-mx-highbay-033569.html?redirected=
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1 -
Controller, Lighting Control System
ABB Line Coupler
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control
device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgradedIt supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups. Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: LK/S 4.1 -
Controller, Lighting Control System
ABB Light Controller, 2-fold, 1-10 V
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
SKU: LR/S2.16.1 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1
