Steinel IS 345 EAN 4007841033798
Out of stock
Huge reach. Infrared motion detector IS 345 for indoors and out, ideal for passageways, corridors and commonly used spaces, installation height 5 m, detection zone 12 x 6 m (radial) and 23 x 6 m (tangential), large terminal compartment for easy installation, heavy-duty relay for high switching capacity. Available either in round or square surface-mounted and concealed version.
RM264.58
Out of stock
European Article Number (EAN)
4007841033798
Type
Motion detectors
Dimensions (? x H)
126 x 65 mm
Mains power supply
220 ? 240 V / 50 ? 60 Hz
Sensor Technology
passive infrared
Application, place
Outdoors, Indoors
Application, place, room
corridor / aisle, multi-storey / underground car park, outdoors, Indoors
Twilight setting
2 ? 1000 lx
Time setting
5 s ? 15 Min.
Output
2000 W
Constant-lighting control
No
Basic light level function
No
Functions
Normal / test mode, Manual ON / ON-OFF
Settings via
Remote control,Potentiometers,Smart Remote
For more product details, please refer :
- https://www.steinel.de/en/lights-sensors/serien-lights-sensors/3000-series/is-345-033798.html?redirected=1
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1 -
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1
