Steinel IS 345 MX Highbay EAN 4007841058302 KNX – concealed, sq.
Out of stock
Surveillance on the highest level. Infrared motion detector IS 345 MX Highbay for indoors
ideal for large heights in depots, high-bay warehouses, machine shops, check-in areas and departure lounges
installation height 14 m
detection zone 30 x 4 m (radial)
large terminal compartment for easy installation. Available as square surface-mounted and concealed version.
RM405.13
Out of stock
European Article Number (EAN)
4007841058302
Type
Motion detectors
Dimensions (L x W x H)
94 x 94 x 78 mm
Sensor Technology
passive infrared
Application, place
Indoors
Application, place, room
high-bay warehouse, Indoors
Type of installation
Concealed wiring
Capability of masking out individual segments
Yes
Reach, radial
30 x 4 m (120 m_)
Reach, tangential
30 x 4 m (120 m_)
Twilight setting TEACH
Yes
Time setting
0 s ? 1092 Min.
Basic light level function
Yes
With bus coupling
Yes
For more product details, please refer:
https://www.steinel.de/out/media/datasheet/90566_Data%20sheet%20-%204007841058302%20-%20MOTION%20DETECTOR%20IS%20345%20MX-E%20KNX%20V3.1%20UP.pdf
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1 -
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1
