Schneider KNX ARGUS Presence with light control and IR receiver
Out of stock
Presence detection indoors
If KNX ARGUS Presence detects smaller movements in the room, data telegrams are transmitted via KNX to control the lighting, blind or heating at the same time
RM1,685.10
Out of stock
Angle of detection: 360?
Range: a radius of max. 7 m (at a mounting height of 2.50 m)
Number of levels: 6
Number of zones: 136 with 544 switching segments
Number of movement sensors: 4, separately adjustable
Light sensor: internal light sensor infinitely adjustable from approx. 10 to 2000 Lux (ETS);
external light sensor via KNX
Number of IR channels: 10 for controlling KNX devices, 10 for configuration
EC Directives: Low-voltage guideline 2006/95/EC and EMC guideline 2004/108/EC
Accessories: Surface-mounted housing for ARGUS Presence MTN550619
Transmitter: IR universal remote control MTN5761-0000
Contents: With bus connecting terminal and supporting plate
Brand
Schneider
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)SKU: so-sch-4 -
Controller, Lighting Control System
ABB Line Coupler
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control
device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgradedIt supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups. Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: LK/S 4.1 -
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1
