KNX Bus connector White-Red
100 in stock
Terminal block for the connection of SELV lines, e.g. 30 Vdc auxiliary power supply. It allows the connection of max. 4 pairs of wires. To be used also as distribution terminal in wall boxes. Colour coding: yellow/white
RM9.80
100 in stock
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1 -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005
