KNX – DALI Gateway, 1 channel
100 in stock
The DALI Gateway is mainly used to control the
DALI dimming load. The bus supports up to 64
device address allocation and management,
containing 14 groups and 14 scenarios. The
functions of on/off, relative value dimming, and
absolute diming are supported for each group.
Engineering tool ETS is used to program and
operate the DALI gateway
RM1,620.00
100 in stock
KNX DALI Gateway, 1 channel, 64 DALI Devices
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Current Consumption Max. 10mA
Power Consumption Max. 250mA
Control Functions 16 Group, 14 Scenes, 1 Central Control
Number of Contacts 1 EIB Bus, 1 24V DC power connection terminal
Output Current <300mA
KNX Connection Bus terminal (Black / Red)
Ambient Humidity <= 90%
Operation temperature 0 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 80 °C
Mounting 35mm mounting rail
Size (W x H x D) 72 x 90 x 65 mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Certification EIB KNX certified, IP20
Operating Voltage 24 ~ 30 VDC via KNX bus voltage
Finishing White
Weight 0.3KG
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1 -
Lighting Control System
KNX Push Button, 3-fold, White
Push Button Sensor Plus Series is a KNX push
button switch used to provide seamless
experience of KNX system. Frame is separately
purchased and is compatible with any European
standard 55mm frame. This series comes in either
white or black modules.
SKU: GC10PB003WH -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1
