Schneider KNX DALI gateway REG-K/1/16(64)/64/IP1
Out of stock
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).
The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgraded
It supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups.
Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
RM8,614.10
Out of stock
Supply voltage: AC/DC 100-240 V, 50/60 Hz
Outputs: DALI D+, D-, DC 16-18 V (basic insulation, not SELV), max. 128 mA, short circuitproof
Interfaces: KNX, Ethernet RJ-45, DALI
Type: Category I control device (single master)
Wire range: Supply or DALI: 1.5-2.5 mm_
Type of protection: IP 20
Device width: 4 modules = approx. 72 mm
Contents: With bus connecting terminal.
Brand
Schneider
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/12×230/10 with manual mode
For independent switching of up to 12 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-7 -
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1
