Greencontrols KNX-DALI Gateway
Out of stock
Greencontrols DALI Gateway is used to control DALI dimming loads. This gateway supports up to 64 devices addresses, 14 groups and 14 scenarios.
RM1,650.00
Out of stock
Operating Voltage: 21 – 30 VDC via KNX
Current Consumption: <10mA
Channels: 1 Channel, up to 64 DALI drivers
Control Functions: 14 Group, 14 Scenes, 1 Central Control
Number of Contacts: 1 EIB Bus, 1 24V DC Power connection terminal
Certification: KNX Certified
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1 -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8 -
Controller, Lighting Control System
ABB Shutter Actuator 8 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 8.230.1.1
