KNX IP Router
100 in stock
This device is a KNX to IP router. It can be used as
line coupler or area coupler with an IP based
backbone or main line, through KNX/IP Routing
protocol. It also allows programming or
monitoring a device from the IP network by using
KNX/IP Tunneling protocol.
RM2,309.10
100 in stock
IP Router
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Current Consumption Max 20mA @ KNX
Power Consumption Max 600mW @ KNX
Operation LED Green means device working well;
LED Red and push button for assigning physical address
IP Interface 1 x RJ45 port
KNX Connection Bus terminal (Black / Red)
Operation Temperature –10 °C ~ + 45 °C
Storage Temperature – 40 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 36 x 90 x 65 mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Finishing Grey
Weight 0.3KG
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005 -
Lighting Control System
KNX Push Button, 3-fold, White
Push Button Sensor Plus Series is a KNX push
button switch used to provide seamless
experience of KNX system. Frame is separately
purchased and is compatible with any European
standard 55mm frame. This series comes in either
white or black modules.
SKU: GC10PB003WH -
Controller, Lighting Control System
ABB Light Controller, 2-fold, 1-10 V
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
SKU: LR/S2.16.1
