Greencontrols Greencontrols KNX Line Coupler
100 in stock
The Line Coupler is used to connect KNX main line
and sub-lines to expand the KNX network. Line
Coupler has its own filter table to simultaneously
reduce the telegram traffic.
RM1,989.00
100 in stock
Line Coupler
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Connections
EIB Primary Line (Left terminal) and EIB Secondary Line (Right
terminal)
Operating Current < 12mA
Filter Table yes
Repeater yes
Standard EIB KNX certified
Operation Temperature –5 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 36mm x 90mm x 70mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Certification EIB KNX certified
Finishing Plastic, Polycarbonate, Color Grey
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1
