Schneider KNX Neo 8 gang Switch, White
Out of stock
RM906.60
Out of stock
Brand
Schneider
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Line Coupler
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control
device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgradedIt supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups. Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: LK/S 4.1 -
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005
