Greencontrols KNX Presence Sensor
Out of stock
Greencontrols Intelligent Presence Sensor for detection of human movement and brightness illumination to enable scene and logic to be set accordingly. Comes with detection via PIR and Microwave for enhanced detection capability
RM900.00
Out of stock
Operating Voltage: 21 ~ 30 VDC via KNX
Current Consumption: ?20mA
Power Consumption: ?250mW
Sensing Capability: Motion (PIR) + Lux (0-2000 Lux) + Microwave Sensing
Certification: KNX Certified
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/12×230/10 with manual mode
For independent switching of up to 12 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-7 -
Controller, Lighting Control System
ABB Light Controller, 2-fold, 1-10 V
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
SKU: LR/S2.16.1
