Greencontrols KNX RIPE Push Button, 1-fold
Out of stock
Greencontrols Push Button RIPE-N Series is a KNX multifunction stainless steel panel used mainly in residential, hotels and commercial applications. ThePanel is pre-built with proximity sensor and programmable LED backlight. Wordings or Icons on the buttons are user customizable.
RM940.50
Operating Voltage: 21-30 VDC via KNX. Require 24VDC as well.
Current Consumption: Max 10mA for KNX, 15mA/Gang for 24VDC
Functions: 1-Gang up to 3 function buttons
Features: Scene control and self-programmable scene module
Backlite Light: White Color LEDs
Material: Metal
Frame: Yes
Sensor Type: Proximity Sensor (Distance Programmable)
Certification: KNX Certified
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1 -
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1
