Greencontrols KNX RIPE-S Thermostat
Out of stock
Greencontrols designer range Thermostat series, RIPE-S, is designed to measure and maintain ambient temperature in 2 and 4 pipe FCU systems. The thermostat is fashioned with a sleek metallic surface, LED illuminated buttons and a LED digital display to give it the ultimate luxurious feel.
RM2,104.00
Operating Voltage: 21-30 VDC via KNX. Require 24VDC as well.
Control Elements: On/Off put switch, Temperature setting, Fan speed setting
Material: Metal
Frame: No
Sensor Type: Proximity Sensor (Distance Programmable)
Certification: KNX Certified
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1 -
Controller, Lighting Control System
ABB Shutter Actuator 4 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps.
Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 4.230.1.1 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005 -
Controller, Lighting Control System
ABB Light Controller, 2-fold, 1-10 V
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
SKU: LR/S2.16.1
