Schneider KNX SPACELYNK LOGIC CONTROLLER
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)
RM6,000.00
Power supply: Clamp, 0.5 mm_?1.5 mm_
Serial: Clamp, 0.5 mm_?1.5 mm_
Operation: -5?C to +45?C
Environment: Can be used at elevations up to 2000 m above sea level (MSL)
Max. humidity: 93 %, no condensation
Dimension: 90 x 52 x 58 mm (HxWxD)
Device width: 3 modules = approx. 54 mm
Brand
Schneider
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System
Switching Actuator – 12 channels, 20A, with Current Detection
The 12-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 12 independent
electric loads via floating contacts. It is built-in with
a mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA006 -
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005 -
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1
