100 in stock
Aurora, Greencontrols designer range Thermostat series, comes with a
sleek metallic design, LED illuminated buttons and a LED digital display with the
function to measure and maintain ambient temperature. Also, the thermostat
can be used to display the monitor of the air quality including Co2, PM2.5 and
more.
RM1,800.00
100 in stock
Operating Voltage: 21-30 VDC via KNX. Require 24VDC as well.
Control Elements: On/Off put switch, Temperature setting, Fan speed setting
Material: Metal
Frame: No
Sensor Type: Proximity Sensor (Distance Programmable)
Certification: KNX Certified
91.6mm x 91.6mm x 7.0mm
There are no inquiries yet.
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
Logic Controller
spaceLYnk is the easiest way to build a complete Building Automation Solutions for commercial segments :
_ Complete Building Automation solution for Small and Medium building with a complete architecture including Light and Room Control (KNX, DALI Control), Metering (Modbus offer, Smartlink RTU and IP), and boiler management (SSL)
_ Complete Building Automation solution for Large Building with a complete architecture managed by SBO (BMS from Schneider Electric) and including Light and Room Control (KNX, DALI Control) and Metering (Modbus offer, Smartlink RTU and IP)
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
