ABB Light Controller, 2-fold, 1-10 V
Out of stock
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
RM1,564.00
Out of stock
Product Net Depth / Length:64.5 mm
Product Net Height:90 mm
Product Net Width:72 mm
Product Net Weight:0.2 kg
Container Information
Package Level 1 Units:box 1 piece
Package Level 1 EAN:4016779664059
Package Level 1 Depth / Length:77 mm
Package Level 1 Height:65 mm
Package Level 1 Width:92 mm
Package Level 1 Gross Weight:0.25 kg
Brand
ABB
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
Schneider KNX DALI gateway REG-K/1/16(64)/64/IP1
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).
The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgraded
It supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.The 64 ECGs can be controlled individually or in groups.
Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: so-sch-3 -
Lighting Control System
KNX Push Button, 3-fold, White
Push Button Sensor Plus Series is a KNX push
button switch used to provide seamless
experience of KNX system. Frame is separately
purchased and is compatible with any European
standard 55mm frame. This series comes in either
white or black modules.
SKU: GC10PB003WH -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8
