Line Coupler
100 in stock
The Line Coupler is used to connect KNX main line
and sub-lines to expand the KNX network. Line
Coupler has its own filter table to simultaneously
reduce the telegram traffic.
RM1,989.00
100 in stock
Line Coupler
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Connections
EIB Primary Line (Left terminal) and EIB Secondary Line (Right
terminal)
Operating Current < 12mA
Filter Table yes
Repeater yes
Standard EIB KNX certified
Operation Temperature –5 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 36mm x 90mm x 70mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Certification EIB KNX certified
Finishing Plastic, Polycarbonate, Color Grey
Brand
Greencontrols
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Shutter Actuator 8 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 8.230.1.1 -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8 -
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1 -
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5
There are no reviews yet.