Schneider Push-button, 2-gang plus, polar white, glossy, System M
Out of stock
Provides you with two, four or eight operating surfaces, two in the case of 1-gang pushbuttons, four in the case of 2-gang push-buttons, and eight in the case of 4-gang push-buttons.
The push-buttons can be set to perform various functions, allowing you, for example, to switch lighting on and off or dim it
control the blinds or retrieve stored scenes
Push-buttons with IR receiver also allow you to operate each key on the push-button using a Schneider remote control or another IR remote control
RM942.30
Out of stock
Initialisation: Due to the telegram rate limit, telegrams can only be created after a minimum of 17 sec has elapsed since
initialisation.
Ambient temperature
Operation: -5 ?C to +45 ?C
Storage: -25 ?C to +55 ?C
Transport: -25 ?C to +70 ?C
Max. humidity: 93 % relative humidity, no moisture
condensation
Type of protection: IP 20
Brand
Schneider
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway. 2 fold
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
SKU: DG/S 2.64.1.1 -
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1
