Push Button Aurora Series SILVER
100 in stock
KNX multifunction designer series panel
(compatible with European Insta Bus (EIB) System)
used mainly in residential, hotels and commercial
applications. The Panel is available in 2 fold up to 4
fold. The Panel is pre-built with proximity sensor
and programmable LED backlight. Wordings are
customizable on the button according to user
preference.
RM1,300.00
100 in stock
Operating Voltage 21 ~ 30 VDC via KNX bus voltage. Require Auxiliary 24VDC as well.
Current Consumption Max 10mA for KNX, 15mA/Gang for 24VDC
Functions For 3 fold, up to 6 functional buttons
Functionality includes control of switching, dimming, curtain and
scenes.
Backlite Light White color LEDs
KNX Connection Bus terminal (Black / Red)
Material Aluminum
Sensor Type Proximity Sensor (Distance programmable)
Operation temperature –5 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 55 °C
Color Black, Silver or Brown
Size (W x H x D) 91.6 mm x 91.6 mm x 33 mm
Operating Voltage 21 ~ 30 VDC via KNX bus voltage. Require Auxiliary 24VDC as well.
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Certification EIB KNX certified
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider Push-button interface, 4-gang plus
Generates an internal signal voltage for connecting four conventional push-buttons or floating contacts, and for direct connecting four low-current LEDs
The cores are 30 cm long and can be extended to max. 7.5 m. For installation in a conventional 60 mm switch box.
SKU: so-sch-5 -
Gateway, Lighting Control System
Schneider KNX DALI gateway REG-K/1/16(64)/64/IP1
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).
The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgraded
It supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.The 64 ECGs can be controlled individually or in groups.
Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: so-sch-3 -
Controller, Lighting Control System
ABB Shutter Actuator 8 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 8.230.1.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6
