Theben RM 8 S KNX
Out of stock
8-way switching actuator FIX1,Adjustable characteristics: e.g. switching, delayed switching, pulse function,Links, type of contact (NC contact/NO contact) and participation in central commands such as continuous On, continuous Off, central switching and save/call up scene
RM2,176.03
Out of stock
*Operating voltage : 110 ? 240 V AC 50 ? 60 Hz
*Type of connection : KNX bus terminal
*Number of channels : 8
*Resistive load :3680 W
Brand
Theben
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1 -
Controller, Lighting Control System
ABB Shutter Actuator 8 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 8.230.1.1 -
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1
