Steinel sensIQ S KNX EAN 4007841056667
Out of stock
The evolution of perfection. The sensIQ S is just as perfect as its larger role model
For indoors and outdoors, ideal for building entrances, loading bays, for mounting heights of up to 5 m
quadruple sensor system for optimum surveillance over 3×100? coverage angle
20 m reach (tangential), reach setting to the accuracy of a metre in 3 independent directions
Remote control and corner wall mount bracket included.
RM507.10
Out of stock
European Article Number (EAN)
4007841056667
Type
Motion detectors
Type of accessory
Corner adapter
Dimensions (L x W x H)
128 x 74 x 114 mm
Sensor Technology
passive infrared
Application, place
Indoors
Application, place, room
multi-storey / underground car park, outdoors, warehouse, front door, all round the building, courtyard & driveway , Indoors
Twilight setting TEACH
Yes
Twilight setting
2 ? 2000 lx
Time setting
5 s ? 15 Min.
Constant-lighting control
Yes
Basic light level function
Yes
Basic light level function time
1-255 min
With bus coupling
Yes
For more product details, please refer :
- https://www.steinel.de/en/lights-sensors/products/sensors/motion-detectors/sensiq-s-knx-056667.html
- https://www.steinel.de/en/lights-sensors/products/sensors/motion-detectors/sensiq-s-knx-004064.html
Brand
Steinel
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1 -
Controller, Lighting Control System
ABB Line Coupler
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control
device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgradedIt supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.
The 64 ECGs can be controlled individually or in groups. Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: LK/S 4.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6 -
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1
