Switching Actuator – 8 channels, 20A, with Current Detection
100 in stock
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
RM1,997.50
100 in stock
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Current Consumption < 12mA
Power Consumption Max. 250mW
Number of Contacts 8
Output Switching Current 16 A/230VAC AC1, 16 A/24VDC (resistive load)
Operation LED Green means device working well;
LED Red and push button for assigning physical address
KNX Connection Bus terminal (Black / Red)
Load Current Circuit
Connection Screw terminals
Operation Temperature –5 °C ~ + 45 °C
Storage Temperature – 25 °C ~ + 55 °C
Installation 35mm mounting rail
Size (W x H x D) 144 x 90 x 64 mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Finishing White
Weight 0.5KG
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider Switch actuator REG-K/12×230/10 with manual mode
For independent switching of up to 12 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-7 -
Gateway, Lighting Control System
Schneider KNX DALI gateway REG-K/1/16(64)/64/IP1
The KNX DALI gateway connects KNX to the DALI bus.
The gateway is a category I control device with an integrated DALI power supply for the ECGs (electronic ballasts / electronic control gear).
The device is a Single-Master Controller according to EN 62386 ed/1 and ed/2.
It is able to control DALI ECGs ed/1 and ed/2 -also mixed- but according to single-master controller it cannot support DALI-2 sensors like movement- and presence detectors, switches etc.
Described features are related to Firmware V3.1.3 or higher with DCA and ETS application 7310 most earlier delivered devices can be upgraded
It supports the switching and dimming of up to 64 ECGs in 16 groups and the control up to 16 scenes.The 64 ECGs can be controlled individually or in groups.
Error messages of individual ECGs or each connected lamp can be transmitted to the KNX and visualised.
SKU: so-sch-3 -
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Lighting Control System
Switching Actuator – 12 channels, 20A, with Current Detection
The 12-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 12 independent
electric loads via floating contacts. It is built-in with
a mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA006
