Theben theMova S360-100 AP WH
Out of stock
Passive infra-red motion detector for ceiling installation, Automatic motion and brightness-dependent control for lighting, Channel A light: relay, 230 V, Brightness switching value configurable, teach-in function, Detection sensitivity configurable
RM313.85
Out of stock
Operating voltage:230 V AC
Frequency:50 Hz
Installation height:2 ? 4 m
Stand-by consumption: ~0.5 W
Setting range brightness:30 ? 3000 lx
Light switch-off delay :10 s – 60 min
Type of contact light:Relay 230 V/10 A ?-contact
Detection range :50 m_ (? 8 m | 360?)
Brand
Theben
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1 -
Controller, Lighting Control System
ABB Actuator 4 Fold
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 4.10.2.1 -
Controller, Lighting Control System
ABB Switch-/Dim Actuator, 8-fold, 16 A
MDRC Devices for switching and dimming of 2, 4 or 8 independent groups of luminaries with electrical ballasts and 1-10V control inputs.
Per channel a potential free relay can be switched on or off via the ABB i-bus? or manually.
Manual and visual operation is included.
A power supply is not necessary.
SKU: SD/S8.16.1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6
