*Operating voltage_230 V AC_
*Installation height_0.8 ? 1.2 m_
*Installation type_Flush-mounted wall installation_Stand-by consumption_~0.4 W_
*Detection range_238 m_ (14 x 17 m)
No products in the cart.
Out of stock
Passive infrared motion detector for flush-mounted wall mounting, 1 channel light, Staircase light function_Extension of detection area via master/slave switching
RM477.32
Out of stock
*Operating voltage_230 V AC_
*Installation height_0.8 ? 1.2 m_
*Installation type_Flush-mounted wall installation_Stand-by consumption_~0.4 W_
*Detection range_238 m_ (14 x 17 m)
There are no inquiries yet.
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
Device for switching and dimming two independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 2-fold light controller for constant light control.
For the control of independent 230 V AC drives via ABB i-bus? KNX
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps.
Additional auxiliary voltage is not needed. To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.