Theben thePrema P360-101 E UP WH
Out of stock
*Passive infrared presence detector for ceiling mounting
*Automatic presence- and brightness-dependent control for lighting and HVAC
*Light measurement can be switched to spot or wide measurement
*Room monitoring with selective movement detection
RM1,760.20
Out of stock
*Operating voltage:110 ? 230 V AC ? 10 %
*Installation height: 2 ? 10 m,Installation type:Ceiling installation
*Stand-by consumption: ~0.1 W
*Setting range brightness: 5 ? 3000 lx
*Light switch-off delay : 10 s ? 60 min
*Switch-on delay presence 0 s ? 10 min / Room surveillance,
*Detection range: 81 m_ (9,0 x 9,0 m)
Brand
Theben
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005 -
Lighting Control System
Switching Actuator – 12 channels, 20A, with Current Detection
The 12-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 12 independent
electric loads via floating contacts. It is built-in with
a mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA006 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6 -
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1
