Operating voltage: 110 ? 230 V A
Installation height: 2 ? 10 m
Stand-by consumption: ~0.15 W
Setting range brightness: 30 ? 3000 lx
Light switch-off delay : 10 s – 60 min
Detection range: 452 m_ (? 24 m | 360?)
No products in the cart.
Out of stock
Passive infrared presence detector for ceiling mounting, Automatic presence- and brightness-dependent control for lighting, Channel A, light: relay, 230V, Connection option for sensors or switches for manual switching with automatic recognition of sensor/switch
RM991.61
Out of stock
Operating voltage: 110 ? 230 V A
Installation height: 2 ? 10 m
Stand-by consumption: ~0.15 W
Setting range brightness: 30 ? 3000 lx
Light switch-off delay : 10 s – 60 min
Detection range: 452 m_ (? 24 m | 360?)
There are no inquiries yet.
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
For controlling DALI devices via the ABB i-bus?.
Two DALI output for up to 2×64 DALI slaves.
DALI power supply is integrated.
Control and status feedback is carried out via KNX per DALI slave (2×64), with groups (2×16), together in broadcast or per scenes (2×16). Extensive fault and error messages are available Self-contained emergency converter (2×64) acc.
EN 62386-202 will be supported. By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered.
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated.
DALI telegram rate can change.
Uses potential free contacts to switch 4 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.