Theben theRonda P360 KNX UP WH
Out of stock
KNX Passive infrared presence detector for ceiling mounting, 2 channel light and 2 channel presence, 2 channel light C1, C2 with 1 light measurement, Can be used as fully or semi-automatic, switchable, Dimmable lighting in switch mode with stand-by function, Switch or constant light control mode with stand-by function
RM1,446.02
Out of stock
*Installation height : 2 ? 10 m
*Measuring range brightness : 30 ? 3000 lx
*Detection angle : 360?, Installation type: Ceiling installation
*Light switch-off delay: 30 s ? 60 min, Presence switch-off delay : 10 s – 120 min
*Detection range : 452 m_ (? 24 m | 360?)
Brand
Theben
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System
Switching Actuator – 12 channels, 20A, with Current Detection
The 12-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 12 independent
electric loads via floating contacts. It is built-in with
a mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA006 -
Controller, Lighting Control System
ABB Shutter Actuator 8 Fold
For the control of independent 230 V AC drives via ABB i-bus? KNX.
The devices are designed for positioning blinds, roller shutters, awnings and other shading products as well as for controlling doors, windows and ventilation flaps. Additional auxiliary voltage is not needed.
To protect the drives, the output contacts are electromechanically locked against each other.
Push buttons are located at the front of the device to control the outputs e.g. during commissioning.
The current status of the output is displayed via LEDs.
SKU: JRA/S 8.230.1.1 -
Lighting Control System
Switching Actuator – 8 channels, 20A, with Current Detection
The 8-Channel switching actuator is designed for
installation in distribution board and is suitable for
switching resistive loads and 8 independent electric
loads via floating contacts. It is built-in with a
mechanical bypass button which can be switch
ON/OFF manually. Each output is parameterized
via the ETS software
SKU: GC04SA005
