Theben theRonda S360-100 UP WH
Out of stock
Passive infrared presence detector for ceiling mounting, Automatic presence- and brightness-dependent control for lighting, Channel A, light: relay, 230V, Reduction of switch-off delay time in the event of short presence (brief-presence)
RM598.60
Out of stock
Operating voltage:110 ? 230 V AC, Installation height:2 ? 4 m, Installation type:Ceiling installation, Stand-by consumption: ~0.1 W, Setting range brightness:30 ? 3000 lx, Light switch-off delay : 10 s – 60 min, Detection range:50 m_ (? 8 m | 360?)
Brand
Theben
General Inquiries
There are no inquiries yet.
Related products
-
Lighting Control System, Power Supply
ABB Power Supply 640mA
KNX power supplies 640 mA generate and monitor the KNX system voltage (SELV).
The bus line is decoupled from the power supply by an integrated choke.
The voltage output is short-circuit and overload protected.
The two-color LED indicates device output status.
Device type SV/S 30.640.3.1 has an additional 30 V DC short-circuit and overload protected voltage output that can be used to power an additional bus line (in combination with a separate choke).
With two-coloured status indicator and wide range input from 85?265 V AC, 50/60 Hz.
SKU: SV/S 3.640.3.1 -
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Controller, Lighting Control System
Schneider Blind/switch actuator REG-K/8x/16x/10 with manual mode
For independent control of up to 8 blind/roller shutter drives or for switching up to 16 loads via make contacts
The function of the blind or switching channels is freely configurable
All blind/switch outputs can be operated manually using push-buttons
SKU: so-sch-8 -
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1
