Theben theRonda S360 KNX AP WH
Out of stock
Passive infrared presence detector for ceiling installation, Automatic presence- and brightness-dependent control for lighting and HVAC, 2 light channels C1, C2, Switching mode with dimmable lighting, Brightness switching value or set point value can be set in lux by using parameters, the object or via remote control
RM945.09
Out of stock
*Installation height : 2 ? 4 m, Measuring range brightness : 10 ? 3000 lx, Detection angle : 360?, Installation type: Ceiling installation, Light switch-off delay: 30 s ? 60 min
*Presence switch-off delay : 10 s – 120 min, Detection range : 50 m_ (? 8 m | 360?)
Brand
Theben
General Inquiries
There are no inquiries yet.
Related products
-
Gateway, Lighting Control System
ABB Dali Gateway
For controlling DALI devices via the ABB i-bus?
One DALI output for up to 64 DALI slaves. DALI power supply is integrated
Control and status feedback is carried out via KNX per DALI slave (64), with lighting groups (16), together in broadcast or per scenes (16)
Extensive fault and error messages are available Self-contained emergency converter (64) acc. EN 62386-202 will be supported
By means of KNX and emergency converter different emergency tests (e.g. function and duration test) can be triggered
Feedback is sent. Slave-, staircase-, force-, block- and scene- function are integrated. DALI telegram rate can change.
SKU: DG/S 1.64.1.1 -
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1 -
Controller, Lighting Control System
ABB Light Controller, 4-fold, 1-10 V
Device for switching and dimming four independent groups of luminaries with electronic ballasts (0 ? 10 V control input).
When combined with the light sensor LF/U 2.1 the device can be used as a 4-fold light controller for constant lightcontrol.
SKU: LR/S4.16.1 -
Controller, Lighting Control System
ABB Actuator 12 Fold
Uses potential free contacts to switch 12 independent electrical loads via the ABB i-bus?
Manual operation and display of the switching state of the contacts
The 10AX device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc
EN 60669.
SKU: SA/S 12.10.1
