USB Interface (Din Rail type)
100 in stock
The din rail mounted USB Interface is used to
connect the KNX system to a PC via USB socket type
A in order to configure, parameterize and
commission the KNX installation via the ETS
software. This version provides a fixed and stable
connection, sacrificing the mobility offered by the
mobile version.
RM1,220.00
100 in stock
USB Interface (Din Rail Mounted)
Operating Voltage 21 ~ 30 VDC via KNX bus voltage
Operating Current, KNX < 10mA
Output 1 USB Interface
Interface USB 2.0
PC Connection Via USB socket type A or USB socket type D
Operation
Green LED means device working well
RED LED and push button for assigning physical address
Operation Temperature –10 °C ~ + 45 °C
Storage Temperature – 40 °C ~ + 55 °C
Installation Standard 35mm Din Rail Mounting
Size (W x H x D) 36mm x 90mm x 65mm
CE norm According to the EMC and low voltage guideline, EN 50090-2-2
Finishing Plastic, Polycarbonate, Color White
Weight 0.3KG
Brand
Greencontrols
General Inquiries
There are no inquiries yet.
Related products
-
Controller, Lighting Control System
Schneider Switch actuator REG-K/12×230/10 with manual mode
For independent switching of up to 12 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-7 -
Controller, Lighting Control System
ABB Actuator 8 Fold
Uses potential free contacts to switch 8 independent electrical loads via the ABB i-bus?.
Manual operation and display of the switching state of the contacts.
The 10AX-AC1 device is especially suited for loads with high surge currents e.g. flourescent lighting (AX) acc. EN 60669.
SKU: SA/S 8.10.2.1 -
Lighting Control System, Power Supply
Schneider KNX power supply REG-K/640 mA, light grey
For generating the bus voltage for a line with up to 64 bus devices.
With integrated choke to decouple the power supply from the bus and a push button to disconnect the power and reset the bus devices connected to the line.
For installation on DIN rails TH35 according to EN 60715.
The bus is connected using a bus connecting terminal; a data rail is not necessary.
SKU: so-sch-1 -
Controller, Lighting Control System
Schneider Switch actuator REG-K/4×230/10 with manual mode
For independent switching of up to 4 loads via make contacts
The function of the switching channels is freely configurable
All switching outlets can be operated manually using pushbutton operation
SKU: so-sch-6
